The drip irrigation project consists of four parts: the water source project, the first hub, the water delivery and distribution pipe network, and the capillary or dripper with irrigation holes.

1 Water delivery pipes are multi-purpose RE pipes, the pipe diameter is determined according to the flow rate, and the connecting parts such as joints, tees, elbows, plugs, bypasses, valves, etc. should be matched.

2 The water flow capacity of the water meter is greater than the pipe flow.

3 Install intake and exhaust valves to prevent vacuum from clogging the capillary.

4 The water source must be filtered by a filter. The filters include a mesh filter laminated filter and a sand filter, depending on the water quality.

5 pipes are arranged one by one, roll the pipes slowly around the disc, and put the pipes in the pipe trench. Spraining or dragging anywhere is forbidden to prevent damage to the pipes.

6 After installation, the pipeline should be flushed to prevent blockage.